CUE REPAIR:
* CUE TIP REPLACEMENT * |
||
| LePro, Elk Master, Triangle | $15 |
|
| Blue Diamond, Chandivert (8 Kinds) | $15 | |
| Screw-On and Untested | $10 | |
| Water Buffalo, Sumo | $20 | |
| Molavia, Sniper, Talisman, Hercules | $30 | |
| Everest, InStroke, CK, Dynamite | $30 | |
| TAD, Red Pad Layered, Killer | $30 | |
| Moori, Kamui | call for pricing | |
| Hard Bungi, White Diamond, Canvas Phenolic | $30 | |
| Regulard Tip Maintenance (i.e. Remove Mushroom, reshape, clean) | $5 | |
* FERRULE REPLACEMENT * |
||
| Ferrule and Tip (not Threaded) | $25 | |
| Ferrule and Tip (Threaded) | $35 | |
| Ferrule (Threaded, Chalk-Resistant) | $45 | |
| Super Clean ($10 off) | $45 | |
| Tenon Replacement | $25 | |
| Ivory Ferrule | $50 to $125 | |
| Protection Pad | Extra $5 | |
* SHAFT AND BUTT REPAIR * |
||
| C-10 Sand - Light Surface Sanding | $10 | |
| C-10 Alchohol - Alchohol surface clean only. No size change! | $10 | |
| C-15 Special - Size change of .003-.005. Removes most dents and chalk buildup | $15 | |
| C-20 Super - Size change of .002-.004. Removes small dents and chalk buildup | $20 | |
| C-25 Predator or Meucci Shaft | $25 | |
| C-25 Super Glide - slightly smoother than Special or super | $25 | |
| C-30 Predator or Meucci Shaft - Shaft wood and ferrule the same size! | $30 | |
| C-40 Ultimate - steam clean full shaft. Little to no size change in shaft. | $40 | |
| C-50 Ultimate and Perfect Shaft - steam clean and additional treatment to renew shaft | $50 | |
| Serious Dent Removal - requires filling, etc.. | $10 to $30 | |
| Shaft Size Change - 1st 1/4mm removed (+$5 for each additional 1/4mm removal) |
$35 | |
| Taper Change (Must be present during process) | $20 to $40 | |
| Shaft Collar | $35 to $60 | |
| Brass Screw Insert | $60 | |
| New Irish Linen Wrap | $45 | |
| Wrap Cleaning | $20 | |
| Clean and Polish Butt | $20 | |
| Exotic Leather and Cork Wraps | $100 to $400 | |
| Joint Collars | $35 to $60 | |
| Bent Screw Repair | $20 to $30 | |
| Weight Inspection (Minimum Charge) | $10 | |
| Weight Change (Includes Inspection) | $10 to $40 | |
| New Bumper | $10 to $50 | |
| New Butt Cap | $40 -$60 | |
* ADDITIONAL PRODUCTS & SERVICES * |
||
| Shaft Cleaning Kit | $15 | |
| Used Shaft | $60 | |
| New Shaft | $125 to $350 | |
| Schon Shafts | $150 | |
| Schon Joint Protector | $15 | |
| Jump Handles, Jump Cues | $50 to 250 | |
| Whole Cue Restoration | $150 and up | |